Telecab Residential Elevator
AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
The Telecab Residential Elevator is a two-stop home elevator designed for use by individuals with mobility or walking disabilities or spinal cord injury. The Telecab has a 2:1 roller chain hydraulic drive system that uses a 110 volt AC, 1.5 horsepower screw type motor with pressure relief valve to prevent platform overload and slack chain safety device. It moves at 25 feet per minute. Standard features include roller guide shoes; keyed call/send stations; continuous pressure directional push buttons; non-skid platform surface; 25-inch plexiglass windows; front-only car access; time delay for automatic door lock system; adjustable top floor presence detector built in to the cab; electro-mechanical door lock and open door sensor; under panel safety sensor; emergency stop and alarm; emergency battery lowering device; emergency lowering; fully enclosed drive tower; telephone in cab; halogen light in cab. OPTIONS: Three-stop capability; front / back access; battery operation in up and down direction; electro-mechanical door lock and open door sensor; under-panel safety sensor; door closer; remote hand control; door mount or side mount car control station; and an in-cabin automatic door opener. DIMENSIONS: Cab (HxWxD) 78 x 30 x 46 inches (standard) or 78 x 32 x 54 inches (optional). Maximum travel height: 16 feet (standard); 23 feet (optional with 3 stops). Minimum floor cutout (LxW): 59 x 34 inches. Minimum overhead at top landing: 90 inches. POWER: 110 volts AC, 20 amps, 1 phase. COLOR: Almond beige or white acrylic urethane paint finish is standard. Custom colors are available. CAPACITY: 500 pounds.