Bruno Electra-Ride Ii (Model Sre-1550)
AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at 0, 45 and 90 degrees, and it will only lock and unlock at the top and the bottom of the stairway. The seat folds when not in use, and is equipped with a folding footplate; footrest and carriage safety switches; two armrests that swing out for easy transfer; and a retractable seatbelt. The seat height is adjustable. Custom seating and seat coverings are available. POWER: Two 12-volt batteries, continuously charged by a state-of-the-art battery charger that plugs into a 110-volt household outlet. Uses 24-volt 1.02 horsepower DC motor with a 20:1 right angle self locking worm drive. In case of power outage, the unit will have between 8 and 20 round trips on a battery charge. DIMENSIONS: Rail width is 7.5 inches and folded width is 15 inches. Standard track lengths of 16 and 20 feet are available but can be cut by dealer or installer to actual length of stairway. OPTIONS: Custom length rails up to 50 feet; large seat; overspeed safety brake. Commercial package includes overspeed safety brake, two keyed remote call/send controls, and a keyed rocker switch on the chair. WEIGHT: 300 pounds without rider in typical 16-foot installation. CAPACITY: 350 pounds.