AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
"DO IT YOURSELF" ENTRY --- PURPOSE: To enable children with limited hand or finger control to turn pages independently. To adapt the book, number the pages in the book; cut the book apart to separate each page. Laminate each page of the story. Three-hole punch each page and put it in the binder in order. Cut weather stripping into half-inch chunks, peel the backing off each piece and place two or three pieces on each page: one at the top, one at the bottom, and one in the middle. Slide the cover of the book into the front of the binder and make a spine label. MATERIALS: One copy of the book to be adapted, one three-ring binder, 0.5 mil lamination film (or use a service such as Kinko's) for lamination, and self-adhesive rubber weather stripping. SKILLS REQUIRED: Cutting and assembly. TITLE: Adapted Book Project. WEB SITE: Oklahoma ABLE Tech at http://okabletech.okstate.edu/. REF: Make-n-Take Do it Yourself AT. Oklahoma ABLE Tech can also be contacted at Oklahoma State University Seretean Wellness Center, 1514 W. Hall of Fame, Stillwater, OK 74078 USA; 800-257-1705 V/TDD, 405-744-9748 V/TDD, 405-744-2487 Fax.