Above-Ground Pool Lifts (Models Ag48Wp, Ag48, Ag60, & Ag72)
AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
Aquatic Access Above-Ground Pool Lifts (Models AG48WP, AG48, AG60, and AG72) are water powered lifts designed to assist persons with disabilities to enter and exit pools constructed above ground. Suitable for pools up to 4-feet deep at the point the lift is installed, the Pool Lift allows a person to ride up 30 inches, turn over the wall of the pool, and ride down 30 inches into the water. The stainless steel cylinder mounts to a 4 by 4 foot treated post sunk 30 inches into the ground and cut to the top of the pool (owner provided). MODEL AG48WP: has a 48-inch cylinder and is designed for exterior use in the ground. MODEL AG48: also has a 48- inch cylinder, but was designed for installation on concrete. It has a 10 by 10 inch stainless steel plate welded to the bottom of the cylinder to lag bolt to the floor. MODEL AG60: has a 60-inch cylinder and a maximum vertical seat travel of 38 inches. It was designed for interior use in Grecian and other swim spas. It has a 6 by 6 inch stainless steel plate to lag bolt to the floor and also attaches to the top pool flange. MODEL AG72: has a 72-inch cylinder and a maximum vertical seat travel of 42 inches. Intended for interior use in Swimex and other therapy pools. It has a 6 by 6 inch stainless steel plate to lag bolt to the floor, and also attaches to the top pool flange.
3573.00 to 2475.00