Wheelchair Accessories

"t"tube-Plate Weldment (Models 1521, 1521-01, 1522, & 1522-01)
Description: 

The "T" Tube-Plate Assembly Weldment is headrest accessory interface hardware designed for positioning an Occipital Angle Bar or an Occipital "T" Bar on a wheelchair.

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)
Description: 

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs.

"z" Tray Slide Bracket Attaching System (Model 32799)
Description: 

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front.

10 Inch Slide Mounting Kit (Models 3624 & 3624-01)
Description: 

The 10 Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair.

Description: 

The 10-inch Scooter Bag, model 70300, is a carrying bag for three-wheel scooters designed to hang from the handlebars on the tiller. This bag features a spring action hex frame opening to allow easy access to all items in the pouch.

Description: 

The 13-inch Armrest Bag, model 70320, is a wheelchair side pouch designed for use on three-wheeled scooters. The caddy attaches to the arms using side release clips.

Description: 

The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users.

Description: 

DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. The 2-Piece Wheelchair Belt (no. 63000) is a wheelchair seatbelt with a quick-release aircraft buckle. The belt is provided in two pieces for easy attachment.

Maker: 
Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Pneumatic tire on 24 inch or 61 centimeter wheel.

Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Twenty-four inch or 61 centimeter pneumatic tire and wire spoke wheel.

BEASYGLYDER TRANSFER SYSTEM
Description: 

The 32 Inch Beasy Glider Transfer System is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfers. Since there is no lifting involved, the risk of back and brachial plexus type injuries for the person being

3D printed wheelchair Hand Drive
Description: 

The Hand Drive wheelchair attachment is a prototype that can be attached to any wheelchair and allows it to be powered in a rowing motion.

Seller(s): 
3Rd Hand Small Electronics Mount
Description: 

The 3rd Hand Small Electronics Mount is an extension arm for wheelchair accessories designed for use by individuals with mobility or neurological disabilities or spinal cord injury.

4 Cup Coffee Caddy
Description: 

The 4 Cup Coffee Caddy is designed for use by individuals with mobility disabilities. The plastic tray is designed to handle any size of hot or cold beverage drinks.

Seller(s): 
Description: 

Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00).

Description: 

DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. Variable speed controller for power reclining systems. Can power any 24 volt recliner motor. "Soft" start and stop and finite speed control.

6-Seater Picnic Table- Fits 1 Wheelchair
Description: 

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified.

6650 Half Mask
Description: 

The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest.

6917 Non-Stomp-Down-Able Heel Loops
Description: 

The 6917 Non-Stomp-Down-Able Heel Loops are flexible polyethylene strap designed to provide an alternative to webbed heel straps on wheelchair footrests. An ankle strap is included for maintaining foot placement, as well as attachment screws.

Translate

English French German Italian Portuguese Russian Spanish