Sorry, you need to enable JavaScript to visit this website.

Trunk Supports

Description: 

DISCONTINUED. (Verified 04/2013) RETAINED IN DATABASE FOR REFERENCE. The 4 Way Buckle Strap Kit is a shoulder and torso support set.

6610 Chest Support
Description: 

The 6610 Chest Support is a torso support and harness restraint designed for firm trunk support. The support is made of foam with an inner moldable core that can be formed to follow body contours.

6620 Modular Chest Support
Description: 

The 6620 Modular Chest Support is an adjustable torso support that allows individualization to fit different body variations.

6625 Trunk Support Bar & 6626 Trunk Support System
Description: 

The 6625 Trunk Support Bar and the 6626 Trunk Support System are torso support and pelvic stabilizers designed for use when an individual is seated in a wheelchair or custom seating system.

6676 Contour Covers & 6678 Harness Covers
Description: 

6676 Contour Covers and 6678 Harness Covers are padded covers for lap belts and shoulder straps. The covers are made of vinyl coated foam tubes that slide over belts and straps. The covers are flexible and washable.

6800 Seating Accessory System
Description: 

The 6800 Seating Accessory System is designed to provide head and trunk support to feeder seats. A pre-formed aluminum bar incorporates an attached head positioner with the Danmar chest support.

7906 Chest Support Straps
Description: 

The 7906 Chest Support Straps are torso support accessories for the 6620 Modular Chest Support or the 6800 Seating Accessory Systems(see separate entries). SIZES: Infant, extra small, small, medium or large. COLORS: Black or rainbow.

Description: 

The 7907 Chest Support Hardware is a torso support accessory for the 6610 Chest Support (see separate entry). STRAP OPTION: Bottom or yoke.

Description: 

The 7908 Reinforced Yoke Area for 6610 is a torso support accessory designed for use with the 6610 Chest Support (see separate entry) to reinforce areas receiving hard wear.

7910 Elongated Yoke Area For 6610 Or 6620
Description: 

The 7910 Elongated Yoke Area for 6610 or 6620 is a torso support accessory designed to replace the straps of the Danmar Chest Supports (see separate entries).

Acuback Heat Roller For Back Pain Relief
Description: 

The Acuback heat roller is designed to relieve tension with therapeutic warmth. IT is microwavable and offers back and neck support.

Seller(s): 
Description: 

The Adjustable Trunk Supports are lateral supports designed to assist in positioning the body of wheelchair users. The supports mount to the side frame of wheelchairs.

Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)
Description: 

The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs.

Description: 

Lateral trunk support for adaptive positioning. 1/4 inch ABS plastic base with separate removable or replaceable cushion. Can be used with a sling or solid back. Pads are straight, not contoured and can adjust vertically, horizontally and front to rear.

Description: 

DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. Adjustable webbing harness with shoulder straps and 3 cross straps to provide trunk and head support and facilitate correct body alignment. Can be worn for long periods of time.

Description: 

DISCONTINUED. (Verified 04/2007) RETAINED IN DATABASE FOR REFERENCE. Body straps made from 2 inch wide nylon webbing with eyelets in both ends for mounting to wheelchair with back upholstery screws.

Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Torso support pads clamp to 7/8 inch tubular steel wheelchair frames. Provide trunk positioning.

Description: 

The Bolster Thoracic Supports are straight lateral trunk supports designed for use in conjunction with the Otto Bock MOSS II seating systems (see separate entries).

Description: 

The BTS/STS Custom Fixtures and Bending Tool are a ball and rod fixture for STS lateral trunk support or slim line fixture for BTS lateral trunk support. They have an 18 inch rod which can be custom bent and cut.

Burnett Body Supports
Description: 

The Burnett Body Support is a seating support designed to provide postural support for children and adults with diagnoses associated with multiple sclerosis, spinal cord injury, cerebral palsy, stroke or dystonia. 

Translate

English French German Italian Portuguese Russian Spanish