Price < 50 Dollars

3459 Hard Shell Ear Coverings
Description: 

The 3459 Hard Shell Ear Covering is an accessory for Danmar protective helmets. The coverings are made of an inner layer of soft ventilated foam and an outer covering of tough polycarbonate plastic.

3460 Soft Foam Ear Coverings
Description: 

The 3460 Soft Foam Ear Covering is an accessory for the 9820 Soft Shell Helmet. The coverings are made of soft ventilated 0.5-inch thick foam that extends over the ear openings on a soft shell helmet.

3464 Rear Foam Extension
Description: 

The 3464 Rear Foam Extension is an accessory for Danmar protective helmets designed to provide additional head protection and ventilation. The extension attaches to the rear of the helmet, and is made of vinyl coated shock absorbing foam.

3465 Rear Hard Shell Extension
Description: 

The 3465 Rear Hard Shell Extension is an accessory for protective helmets designed to provide additional ventilated coverage by extending the foam liner and polyethylene shell. SIZES: Length shell should be extended is specified by the buyer.

Description: 

The 3468 Foam Visor is an accessory for protective helmets. This padded visor attaches to the front of the helmet and extends out approximately 3 inches. The visor is made of closed cell foam with vinyl coatingand retains compression resistance.

3469 Quick Release Buckle Chin Strap Top Of Helmet
Description: 

The 3469 Quick Release Buckle Chin Strap Top of Helmet is an accessory for protective helmets to be used in place of a regular chin strap when frequent attempts to remove the helmet occur.

3M Peltor Bullseye Ultimate 10 Earmuffs (Model Nrr 29 97010)
Description: 

The 3M Peltor Bullseye Ultimate 10 Earmuffs, model NRR 29 97010, are ear muffs designed for use by individuals who are hard of hearing and or have sensitivity to noise.

3M Safety Bath Mat
Description: 

The 3M Safety Bath Mat is a bathtub mat designed for use by individuals with balance or mobility disabilities. Made from pressure-sensitive 3M Safety-Walk vinyl material, the mat is comfortable to the skin and can be cleaned in the same way as a tub.

Description: 

3M Safety-Walk Slip-Resistant General Purpose Tape – 600 Series is anti-skid tape designed for use to prevent slipping on floors and stairs. The tape has a mineral coated, high traction surface with pressure-sensitive adhesive backing.

Description: 

DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. The 3rd Grip Pole Holster is a fishing rod holder designed for use by individuals with upper extremity or grasping disabilities or spinal cord injury.

Description: 

DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. Bar and Pictographs is a 1-disk math tutorial program and math skills training system geared toward third and fourth grade levels.

Description: 

DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. Geometry is a 1-disk math tutorial program geared for third and fourth grade levels.

Description: 

DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE.

Description: 

DISCONTINUED. (Verified 6/2013) RETAINED IN DATABASE FOR REFERENCE. Men's trousers, elasticized high rise back for wheelchair users, velcro at front fly and at waist, 2 deep pockets, 2 back patch pockets. Poly/ cotton twill. Sizes: S,M,L,XL.

Description: 

DISCONTINUED. (Verified 04/2013) RETAINED IN DATABASE FOR REFERENCE. The 4 Way Buckle Strap Kit is a shoulder and torso support set.

Description: 

DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE.

Maker: 
Description: 

DISCONTINUED (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. The 4-in-1 Switch Modifier is a control switch accessory designed for use by people with upper extremity disabilities.

Description: 

DISCONTINUED. (Verified 10/2009) RETAINED IN DATABASE FOR REFERENCE. The 40-ounce Pressure Sensitive Switch 24.1A is a foot switch designed for use with the LTP Monitor by Consumer Care Products Inc.

Description: 

DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE.

Description: 

The 45 degree Torso Wedge ##2014 is a positioning wedge designed to oblique patient. This wedge is made of polyurethane foam covered in 20 mil heavy gauge vinyl, and is heat sealed to prevent contamination. DIMENSIONS: 10 x 10 x 24 inches.

Translate

English French German Italian Portuguese Russian Spanish