Sorry, you need to enable JavaScript to visit this website.

Lateral Trunk Support

Description: 

The Adjustable Trunk Supports are lateral supports designed to assist in positioning the body of wheelchair users. The supports mount to the side frame of wheelchairs.

Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)
Description: 

The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs.

Description: 

Lateral trunk support for adaptive positioning. 1/4 inch ABS plastic base with separate removable or replaceable cushion. Can be used with a sling or solid back. Pads are straight, not contoured and can adjust vertically, horizontally and front to rear.

Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Torso support pads clamp to 7/8 inch tubular steel wheelchair frames. Provide trunk positioning.

Description: 

The Bolster Thoracic Supports are straight lateral trunk supports designed for use in conjunction with the Otto Bock MOSS II seating systems (see separate entries).

Description: 

The BTS/STS Custom Fixtures and Bending Tool are a ball and rod fixture for STS lateral trunk support or slim line fixture for BTS lateral trunk support. They have an 18 inch rod which can be custom bent and cut.

Burnett Body Supports
Description: 

The Burnett Body Support is a seating support designed to provide postural support for children and adults with diagnoses associated with multiple sclerosis, spinal cord injury, cerebral palsy, stroke or dystonia. 

Carrie Mobile Potty Seat
Description: 

Carrie Mobile Potty Seat is designed for individuals with limited postural control and mobility as a result of neurological impairments.  It is shaped to position legs in a slight flexion and abduction to encourage bladder and bowel functions.

Description: 

CUSTOM ADAPTATION PURPOSE: To provide support for an individual with Parkinson's disease who leans to the right when fatigued. A Henley Twin Electic Recliner was custom-made to the user's measurements.

Description: 

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Shirts are modified to hide chest strap in wheelchair. Shirts and sweaters have small slits made at the appropriate height on each side.

Description: 

Custom Recliner Trunk Controls Series 300 are accessories designed for support of trunk in cases of poor lateral trunk control or scoliosis.

Maker: 
Deluxe Lateral Arm Support (Model 6320)
Description: 

The Deluxe Lateral Arm Support, model 6320, is a trunk support designed for use by wheelchair users who lean laterally. This padded trough has an ambidextrous design, enabling it to fit either wheelchair armrest.

Description: 

The DIY Shirt Wedge is a positioning wedge designed for individuals with mobility disabilities or lower extremity disabilities who have limited trunk strength.

Elevated-Arm Lateral Support (Models 706020 & 706021)
Description: 

The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs.

Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Rigid supports with foam padding. Attach to wheelchair back frame. Two straps for torso, Velcro closure. One size.

Jenx Bee Chair
Description: 

Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating.

Maker: 
Seller(s): 
Description: 

Trunk supports. For use with Adaptive Engineering Lab positioning system or most manual or power chairs. Provide lateral trunk support. Adjusts laterally and vertically. Attach to back frame of wheelchair.

Lateral Body Support (Series 7060)
Description: 

The Lateral Body Support is a lateral trunk support designed for use by individuals who use wheelchairs or geri chairs. These vertical supports stabilize the torso to provide positioning support to reduce leaning to the left or right.

Lateral Pads (Models 31460S, 31460M & 31460L)
Description: 

The Lateral Pads are lateral trunk supports designed for use by individuals who use wheelchairs. Made of textured urethane self-skinning foam, these pads are equipped with T-nuts in all one-inch on center mounting holes. SIZES: Small, medium, or large.

Lateral Stabilizer Armrest Bolsters (Series 7061)
Description: 

The Lateral Stabilizer Armrest Bolsters are lateral trunk supports designed for use by individuals who use wheelchairs. These bolsters fit over the wheelchair armrests to reduce lateral leaning and provide cushioned support for the arms.

Translate

English French German Italian Portuguese Russian Spanish