Sorry, you need to enable JavaScript to visit this website.

Helmets

3459 Hard Shell Ear Coverings
Description: 

The 3459 Hard Shell Ear Covering is an accessory for Danmar protective helmets. The coverings are made of an inner layer of soft ventilated foam and an outer covering of tough polycarbonate plastic.

3460 Soft Foam Ear Coverings
Description: 

The 3460 Soft Foam Ear Covering is an accessory for the 9820 Soft Shell Helmet. The coverings are made of soft ventilated 0.5-inch thick foam that extends over the ear openings on a soft shell helmet.

3462 Extra Long Face Guard Modification
Description: 

The 3462 Extra Llong Face Guard Modification is an accessory for Danmar protective helmets (see separate entries). This guard is a full 1-inch longer than the standard guard, and also has larger eye and mouth openings.

3464 Rear Foam Extension
Description: 

The 3464 Rear Foam Extension is an accessory for Danmar protective helmets designed to provide additional head protection and ventilation. The extension attaches to the rear of the helmet, and is made of vinyl coated shock absorbing foam.

3465 Rear Hard Shell Extension
Description: 

The 3465 Rear Hard Shell Extension is an accessory for protective helmets designed to provide additional ventilated coverage by extending the foam liner and polyethylene shell. SIZES: Length shell should be extended is specified by the buyer.

Description: 

The 3468 Foam Visor is an accessory for protective helmets. This padded visor attaches to the front of the helmet and extends out approximately 3 inches. The visor is made of closed cell foam with vinyl coatingand retains compression resistance.

3469 Quick Release Buckle Chin Strap Top Of Helmet
Description: 

The 3469 Quick Release Buckle Chin Strap Top of Helmet is an accessory for protective helmets to be used in place of a regular chin strap when frequent attempts to remove the helmet occur.

7637 Cush-In-Pads
Description: 

The 7637 Cush-in-Pads are helmet accessories made of lightweight, medical grade foam pads that allow for more individualized sizing of helmets. The material absorbs perspiration and may therefore provide a cooler environment within the helmet.

9817 Halo Helmet
Description: 

The 9817 Halo Helmet is a protective helmet designed for wear by individuals who have balance disabilities, head/skull injuries, or seizures who do not need full head coverage. A band of 5/8-inch foam surrounds the head at the forehead level.

9820 Soft Shell Helmet
Description: 

The 9820 Soft Shell Helmet is a protective helmet made of 1/2-inch shock absorbent, lightweight vinyl coated foam. The helmet has a woven chin strap with adjustable buckle and snap fastener. This helmet is washable.

Description: 

The 9821 Hard Shell Helmet is a protective helmet made of polyethylene with a shock absorbent 1/2-inch vinyl coated foam liner. The woven chin strap has an adjustable buckle and snap fastener.

9822 Hard Shell Helmet With Face Guard
Description: 

The 9822 Hard Shell Helmet with Face Guard is a protective helmet designed to provide all-over head coverage. The face guard is made of Lexan polycarbonate plastic and has an eye level opening for unobstructed vision, and a mouth opening.

9823 Chin Guard
Description: 

The 9820 Chin Guard is a helmet accessory made of 1/2-inch shock absorbent, vinyl coated foam. The guard has small openings for ventilation and a chin strap with nylon buckles.

9824 Hard Shell Helmet With Face Bar
Description: 

The 9824 Hard Shell Helmet with Face Bar is a protective helmet designed for use when direct, face forward impact is probable. The helmet is made of polyethylene and the face bar of clear, Lexan polycarbonate plastic.

9825 Deluxe Hard Shell Helmet
Description: 

The 9825 Deluxe Hard Shell Helmet is a protective helmet made of polyethylene with a vinyl coated 1/2-inch thick foam liner. The helmet has a hard visor with a decorative chrome strip on it. The woven chin strap has a soft plastic chin cup.

9836 Newborn Cap
Description: 

The 9836 Newborn Cap is a protective helmet for infants. The cap is made from soft, 0.375-inch shock absorbent, ventilated foam that can be trimmed in front or back.

Adapta Helmet
Description: 

The Adapta Helmet is a protective helmet designed to provide head protection for adolescents and adults with balance or mobility disabilities or seizures. This helmet features a molded polyethylene shell with a thick foam inner lining.

Description: 

DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. The Adapta Helmet, model PC 8090, is a lightweight molded polyethylene protective helmet designed to prevent injuries due to falls or seizures.

Description: 

DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. Deeply foam padded, molded polyethylene protective helmet. Fully adjustable from 16 to 26 inches around temple. Combines crown protection, ventilation and light weight.

Boomerang Helmet
Description: 

The Boomerang Helmet is a protective helmet designed to provide head protection for infants and toddlers with balance or mobility disabilities.

Seller(s): 

Translate

English French German Italian Portuguese Russian Spanish